IBM sets world-record PV solar-cell power conversion efficiency | KurzweilAI

IBM sets world record for photovoltaic energy conversion efficiency with earth-abundant materials

IBM researchers worked with Japanese thin-film solar company Solar Frontier to get higher solar efficiencies for solar cells made from more abundant materials than from current thin-film cells (credit: IBM Research)

IBM’s Materials Science team has partnered with Solar Frontier, Tokyo Ohka Kogyo (TOK) and DelSolar to develop an efficient and affordable photovoltaic (PV) solar cell made of abundant natural materials.

“Tests of our Cu2ZnSn(S,Se)4 (made of readily available copper, zinc, and tin, and referred to as CZTS) thin-film devices have achieved a world-record PV solar-to-electric power conversion efficiency of 11.1 percent (10 percent better than any previous reports) for this class of semiconductors, say IBM Research photovoltaic scientists Teodor Todorov and David Mitzi.

And it can be manufactured by simple ink-based techniques such as printing or casting.

What makes CZTS better

Energy from the sun reaching the earth’s surface amounts to several thousand times our global consumption of electricity. Yet electricity from photovoltaic (PV) solar cells currently contributes significantly less than one percent of worldwide production. Of the numerous existing PV technologies, none so far have combined the virtues of being highly efficient, cheaply scalable and made with abundantly available materials.

Currently, the most widespread PV semiconductors, made of crystalline silicon, are abundant and highly efficient. They’re in panels used for everything from home electricity to the International Space Station. However, they have extremely high material purity requirements (>99.9999 percent!), and the wafers are typically cut from large solid ingots and wired in series to form PV modules — making it expensive and difficult to upscale.

Other thin-film chalcogenide materials used in PV cells, such as Cu(In,Ga)(SSe)2 (CIGS) and CdTe, have been developed to a performance level close to that of silicon, with inherently more scalable processing, the scientists say. They are directly deposited on large-area, low-cost substrates such as glass, metal or plastic foil.

But their compounds contain rare and expensive elements that increase cost and limit their manufacturing levels to less than 100 Gigawatts per year (worldwide continuous electricity consumption is 15 Terawatts — 150 times greater than the level of what these CIGS can produce).

“Our CZTS PV cells could potentially yield up to 500 GW (0.5 Terawatts) per year — getting closer to the Terawatt levels of renewable electricity the planet needs.”

They hope that within several years this new class of photovoltaic materials will begin to contribute to the wider availability of lower-cost solar electricity.

References:

Teodor K. Todorov, Jiang Tang, Santanu Bag, Oki Gunawan, Tayfun Gokmen, Yu Zhu, David B. Mitzi, Beyond 11% Efficiency: Characteristics of State-of-the-Art Cu2ZnSn(S,Se)4 Solar Cells, Advanced Energy Materials, 2012, DOI: 10.1002/aenm.201200348

via IBM sets world-record PV solar-cell power conversion efficiency | KurzweilAI.

Advertisements
This entry was posted in Solar. Bookmark the permalink.